Testimonials
"With years in the industry, we aim to fulfill your comfort"
At BD Air Conditioning, we understand that every home is unique and deserves its own air conditioning. We aim to provide top-quality air conditioning and customer services. Hear from some of our satisfied customers and check out some of the projects we've completed for our clients.
Wall Mounted Split System
Underfloor Installation
A 9kw Mitsubishi wall-mounted split system installation for a glass panel living room with copper piping running underneath the structure of the building to conceal the piping and wiring. The condenser has been seated on a rubber footing to absorb vibrations. A new power circuit and RCD was installed underneath the structure of the building.
Wall Mounted Split System
Side Ways Installation
Two 2.5kw wall-mounted split systems with side penetrations for two small bedrooms. Internal trunking has been used to conceal the copper piping and wiring, this is to keep the unit 200mm from the wall as required by manufacturer warranty guidelines.
Outdoor unit installations
Daikan 2.5kw Split System installation with outdoor units on rubber footing. The copper piping and wiring have been concealed with Jasper Colourbond trunking and the unit has been placed 1.5m from the water and gas heater as per Australian standards. A new power circuit and RCD was run in the ceiling of the house.
Wall Mounted Split System
Side Ways Installation
Mitsubishi Electric 5kw Split System left-hand penetration for a living room with internal trunking to conceal the copper piping and wiring. The condenser has been placed on mounting brackets to allow for maximum space on the customer's balcony. A new power circuit and RCD was run for this project.
Wall Mounted Split System
Back to Back Installation
The customer requested a standard back-to-back installation for a 6kw unit for their dining room. The condenser has been placed on mounting brackets to allow for cleaning underneath the unit. A new RCD and power circuit was installed in the ceiling of the house.
Wall Mounted Split System
Overhang Installation
The customer requested we requested for wall-mounted split system and to have the piping and wiring run internally through the ceiling of the garage. The condenser was also hung on mounting brackets for access to the sidewalk. A new RCD and power circuit was run through the ceiling of the house.
Wall Mounted Split System
Apartment Installation
A 2.5kw split system sideways installation for an apartment. Apartments tend to have very limited space for air conditioning, but this isn't an issue for us. We always find a way to make it work, the air conditioner is fitted with an isolator and
Commercial Air Conditioner
Back to back installation
A 2.5kw split system installation for Cabramatta Anglican Church, the high ceiling rooms made it quite the challenge to reach, but we took the appropriate steps to bring the wiring and copper down to a safer height. All units were mounted on brackets and fitted with an isolator and commercial-grade RCBO.
Commercial Air Conditioner
Extended side ways installation
Daikan 7.1kw split system for Cabramatta Anglican Church. The foyer desperately needed air conditioning to filter the air in the area. We drilled through two full brick walls and concealed the piping and wiring with internal PVC trunking. The unit ismounted on brackets and fitted with an isolator and commercial-grade RCBO.
Commercial Air Conditioner
Overhang installation
An overhang split system installation for Cabramatta Anglican Church's kitchen area. All material used is rust-free and acceptable for commercial-grade kitchens. The copper and wiring have been concealed in the ceiling. The outdoor system has been mounted on brackets with an isolator and commercial board RCBO.
Wall Mounted Split System
Extended Sideways Installation
The customer has requested a 3.5kw split system installation for the middle of their bedroom. The copper and wiring have been run through a wardrobe and have been concealed with internal trunking. The outdoor unit is mounted on brackets and fitted with an isolator and RCBO.
Wall Mounted Split System
Back to Back Installation
A 2.5kw split system installation for a bedroom with an extended run from the section floor to the outdoor unit. The outdoor unit was lowered to line up with the previous units. The outdoor unit is fitted with an isolator and an RCBO. The drainage has been run into the downpipe to keep the area dry.
